Table of Contents
Advertisement
7. Remove the
system
fan.
8. Remove the
DC-in
.
9. Remove the
WLAN
card.
10. Remove the
WWAN
card.
11. Remove the
system
board.
NOTE:
System board can be removed with heatsink attached.
12. Remove the
coin cell
battery.
13. Remove the
SmartCard reader
About this task
After performing the preceding steps, you are left with the palmrest and keyboard assembly.
Next steps
1. Replace the
SmartCard reader
2. Replace the
coin cell
battery.
3. Replace the
system
board.
NOTE:
System board can be replaced with heatsink attached.
4. Replace the
WWAN
card.
5. Replace the
WLAN
card.
6. Replace the DC-in.
7. Replace the
memory
module.
8. Replace the
system
fan.
9. Replace the speaker.
10. Replace the battery.
11. Replace the
base
cover.
12. Replace the
microSD
card.
13. Follow the procedure in
94
Disassembly and reassembly
board.
board.
after working inside your
computer.
Advertisement
Table of Contents
