Related Manuals for apq stage Standard Stage 500
Summary of Contents for apq stage Standard Stage 500
- Page 1 PLATFORMS FOR PROFESSIONALS ASSEMBLY INSTRUCTIONS Standard Stage 500 apq-stage.com...
- Page 2 Index Introduction Instructions for Assembly / Dismantling Instructions for Use Maintenance and Repairs Storage and Cleaning Positioning of the Protective Equipotential Bonding Product Description Table Fitting the Stage and Telescopic Legs Connection of the Platforms Fitting Stairs Fitting Stair Handrails Fitting Railings Fitting Castors 12 Contact Information...
- Page 3 You have chosen our StandardStage 500 platform system. For your own and the safety of your guests / visitors we kindly ask you to read these assembly instructions carefully and to follow our advice. Please store these instructions safely. The design has been deliberately focused on simple features which show no signs of wear even in the event of frequent assembly and dismantling.
-
Page 4: Instructions For Assembly / Dismantling
Instructions for Assembly / Dismantling Before assembling the stage platform, ensure that the load-bearing capacity of the installation site is at least the same as the nominal load of the platform. Ideally, the platforms should be assembled by two people. Where appropriate, please wear safety gloves and safety shoes in order to prevent injuries during assembly / dismantling. -
Page 5: Storage And Cleaning
Storage and Cleaning The platforms should be stored in a dry place. To ensure quick assembly, it is recommended to store the platforms with the support plate facing downwards. For this, ideally use the supplied accompanying pallets or a transport trolley. The cleaning of the platforms with a screen printed surface can be done using a damp cloth. - Page 6 Fitting the Stage and Telescopic Legs (4 legs per platform must be used) In the corners on the underside, the platforms have the so-called leg mounting brackets with a clamping wedge for the securing of the platform legs. The telescopic legs and the stage legs are inserted in the leg mounting brackets and are then tightened hand-tight (approx.
-
Page 7: Connection Of The Platforms
Connection of the Platforms Platform Connectors The connecting together of the platforms takes place on the underside of the aluminium frame using platform connectors. The platform connectors function as a kind of screw clamp. First one clamp jaw and then the second clamp jaw is hooked on to the underside of the edge profile. - Page 8 Fitting Stairs Push the stairs to the desired position at the platform or at the rostrum. Then connect the stairs to the platform frame using the stair-platform connector. In the process, the supplied accompanying slot nut is swivelled into the assembly groove of the platform frame and tightened hand-tight using the wing screws (approx.
-
Page 9: Fitting Railings
Fitting Railings Railings must be fitted on all open sides of the platforms immediately they are accessible to the public or the assembled height exceeds 20 cm. Safety Handrails (in accordance with DIN) The safety handrails or also DIN railings are simply secured in the groove of the frame profile. Swivel the supplied accompanying slot nuts into the groove and secure the railings at the desired position using the wing screws. -
Page 10: Fitting Castors
Fitting Castors Conversion to a Transport Trolley In just a few minutes, the platforms can also be converted to transport trolleys. To do so, insert the castors (with pre-fitted castor mounts) into the leg mounts of the platforms. This is done as with our platform legs. - Page 12 We wish you great pleasure and success with our products. We are always happy and ready to help you with questions, advice or technical assistance under the following contact information: apq stage GmbH Franziskanerstraße 19 . D-81669 München Tel. +49 (0)89-6661037-0 . Fax. +49 (0)89-6661037-29...
Need help?
Do you have a question about the Standard Stage 500 and is the answer not in the manual?
Questions and answers