VR Entertainment VR Real Feel Baseball Quick Start Manual

3d reality simulator

Advertisement

Quick Links

3 D
R E A L I T Y
QUICK START GUIDE
Follow these instructions and you'll be playing in just few minutes
1

Download The Free App

Search on the Apple App Store or Google Play for
System requirement: Android 4.4 or above iOS 9.3* or above
* The minimum OS requirement may change from time to time - always check www.vr-entertain.com for the latest OS requirements.
2
Assemble the Baseball Bat & Install Batteries
Attach the bottom end of the baseball bat grip to the top half of the bat by
lining up their respective connectors. The connector shapes look something
like the letter D so align them properly. The top and bottom of the baseball bat
must be tightly assembled together to avoid them separating while swinging.
Unscrew the battery
door on the baseball bat.
Install 3 x AAA batteries
and replace the battery door.
ALKALINE
BATTERIES
RECOMMENDED.
USES 3 x 1.5V "AAA" BATTERIES
(NOT INCLUDED)
BATTERY WARNINGS:
RECHARGEABLE BATTERIES NOT RECOMMENDED.
DO NOT MIX OLD AND NEW BATTERIES.
DO NOT MIX ALKALINE, STANDARD (CARBON-ZINC), OR
RECHARGEABLE BATTERIES.
BATTERIES ARE TO BE INSERTED WITH THE CORRECT POLARITY.
Wear the wrist strap and
hold the baseball bat
firmly during game play.
3

Setting Up Your Smartphone

Turn OFF your WiFi and Cellular data.
This will keep you from being disturbed while playing.
You can also set your phone to "airplane mode"
but be sure your Bluetooth
IMPORTANT:
must be working for you to play with VR Real Feel™ Baseball.
4
Launch the VR REAL FEEL
Click & launch the VR Real Feel™ app on your device.
Turn the ON/OFF switch
on the back of the
baseball bat to ON.
Press SCAN in the app to connect your baseball bat by Bluetooth® technology.
The game will start automatically when the baseball bat is successfully connected.
LED on the baseball bat should be lit.
®
This tells you that the Bluetooth
NOTE:
•You must have the baseball bat connected by Bluetooth ® technology for the app to open.
S I M U L A T O R
FPO
(not included)
®
connectivity is still enabled.
Bluetooth ® 4.0(BLE) connectivity
App
connection was successful.
VR Real Feel™ Baseball.
TIP: It's easier to
snap them together if
you place the bottom
end on a firm surface
and press down hard
while holding the top.
Press until you feel
SNAP!
the "snap".
Adult assembly
required.
BATTERY DOOR
NOTE: The LED on the front of the
baseball bat will flash to tell you that the
batteries are working.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VR Real Feel Baseball and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for VR Entertainment VR Real Feel Baseball

  • Page 1 R E A L I T Y S I M U L A T O R QUICK START GUIDE Follow these instructions and you’ll be playing in just few minutes Download The Free App Search on the Apple App Store or Google Play for VR Real Feel™...
  • Page 2 Insert Your Phone To open the front of the headset, press both A and B buttons down at the same time and flip the headset open. VR HEADSET Spread the self-adjusting frame open wide enough to insert your phone. Release and make sure that it holds your phone securely.
  • Page 3 9x6cm 2017-07-05 update Place the 3 self adhesive foam pads on the inside area of the frame clips of the adjustable smartphone holder. This will help prevent the frame clips from accidentally pressing your smartphone buttons.

Table of Contents