Phase 1; Phase 1 List - Fortinet FortiGate FortiGate-4000 Administration Manual

Phase 1

Phase 1

Phase 1 list

246
Phase 1 of an AutoIKE tunnel negotiation consists of the exchange of proposals for
how to authenticate and secure the channel. In most cases, you only need to
configure the basic VPN settings.
To configure phase 1 settings
1 Go to VPN > IPSEC > Phase 1.
2 Select Create New to create a new VPN gateway or select an existing gateway to
configure.
Figure 120:IPSec VPN Phase 1 list
Create New
Gateway Name
Gateway IP
Mode
Encryption
Algorithm
Select Create New to add a Phase 1 configuration, also called a remote
gateway.
The names of the Phase 1 configurations (remote gateways) added.
The IP address of the remote gateway if this is a static IP address
phase 1, Dialup if this is a dialup Phase 1 configuration, and the domain
name if this is a dynamic DNS phase 1.
Main mode or Aggressive mode.
The names of the encryption and authentication algorithms used by each
phase 1 configuration.
Edit, view, or delete phase 1 configurations.
01-28006-0012-20041105
VPN
Fortinet Inc.