Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Yokis E2BP
Summary of Contents for Yokis E2BP
-
Page 2: Radio Transmitters
- Max. relative humidity 80% - Frequency: 2,4 GHz - Transmission: two-way The E2BP/E2BPP may be wired behind pushbuttons (or switches) of any model. Wiring both channels is not indispensable: a single pushbutton can be used connected to a single channel. - Page 3 All receivers (MTR2000ER - MTV500ER - MVR500ER) are compatible with the radio bus. The window shutter controls may also be sent via lighting modules and vice versa. See the “Radio Memo” or go to www.yokis.com for more information on the radio bus. HOW TO CREATE A RADIO BUS BETWEEN RECEIVERS Press “Connect”...
-
Page 4: Operating Mode
3. How to set the pushbutton as centralised 1. Press the transmitter pushbutton 10 times (Configuration Menu). The transmitter LED will flash rapidly. 2. Press the chosen pushbutton 6 times while the LED is flashing. 3. At the end of the press sequence, the LED will flash 6 times to confirm the configuration. 4. - Page 5 T R A N S M I T T E R C O N F I G U R A T I O N S U M M A R Y T A B L E Go to the Configuration Menu to configure a transmitter. To do this, press any transmitter pushbutton or a pushbutton wired to the E2BP/E2BPP 10 times: the transmitter LED will start flashing rapidly.
Need help?
Do you have a question about the E2BP and is the answer not in the manual?
Questions and answers