Audio/Video (A/V) Hookup - Sony SLV-N99 Operating Instructions Manual

010GET.fm Page 10 Friday, November 30, 2001 1:47 PM

Audio/video (A/V) hookup

If your TV has audio/video (A/V) input jacks, you will get a better picture and sound
if you hook up your VCR using these connections. For a true "home theater"
experience, you should connect the audio outputs of your VCR or TV to your stereo
system. If your TV doesn't have A/V inputs, see the following pages for antenna or
cable hookups.
If your TV has the Control S function, hook up your VCR using the connection
shown on page 11. This will allow you to operate your VCR by pointing your VCR's
remote commander at your TV.
If you're not planning to use your VCR to record programs, you're finished setting up
the VCR after you've made the connections shown on pages 10 and 11. If you want
to record regular or cable TV programs, complete these connections first, and then go
to the following pages for antenna or cable hookups.
A Use this hookup if your TV has stereo jacks
VCR
AUDIO VIDEO
LINE-1
IN
LINE
OUT
Audio/video cable (not supplied)
B Use this hookup if your TV doesn't have stereo jacks
VCR
AUDIO VIDEO
LINE-1
IN
LINE
OUT
Video cable (not supplied)
Note
• If you don't have a stereo receiver, connect the white LINE OUT/AUDIO L jack to the
AUDIO IN jack on your TV.
10
Hookups
TV
IN
VIDEO AUDIO OUT
AUDIO
Audio cable (not supplied)
TV
IN
VIDEO
AUDIO
Audio cable (not supplied)
filename[010GET.fm] model name1[SLV-N99]
Stereo receiver
AUX IN
Stereo receiver
AUX IN
[3-071-065-11(1)]