External A/V Source Setup; Dvd Setup - LG MU-42PM11 Owner's Manual

External A/V Source Setup
External A/V Source Setup
How to connect
Connect the audio and video cables from the external
equipment's output jacks to the TV input jacks, as shown in
the figure.
When connecting the TV to external equipment, match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
How to use
1. Select the input source with using the INPUT SELECT but-
ton on the remote control. (If connected to A/V INPUT 1,
select Video 1 input source).
2. Operate the corresponding external equipment. Refer to
external equipment operating guide.

DVD Setup

DVD Setup
How to connect
1. Connect the DVD video outputs (Y, P
PONENT (Y, P , P ) INPUT jacks on the TV and connect
B R
the DVD audio outputs to the AUDIO INPUT jacks on the
TV, as shown in the figure.
2. If your DVD only has an S-Video output jack, connect this
to the S-VIDEO input on the TV and connect the DVD
audio outputs to the AUDIO INPUT jacks on the TV, as
shown in the figure.
NOTE: If your DVD player does not have component video
output, use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the INPUT SELECT or MULTIMEDIA button on the
remote control to select Component 1 or Component 2.
(If connected to S-VIDEO, select the Video 1 or Video 2
external input source.)
3. Refer to the DVD player's manual for operating instruc-
tions.
• Component Input ports
To get better picture quality, connect a DVD player to the compo-
nent input ports as shown below.
Component ports
on the TV
Video output ports
on DVD player
, P ) to the COM-
B R
COMPONENT INPUT 2
COMPONENT INPUT 1
Y P P
R
B
Pr
Y Pb
Y B-Y R-Y
Cr
Y Cb
P
Y P
R
B
Y P P
B R
R AUDIO L VIDEO
Y P P
B R
or
or
B (R) AUDIO (L)
R
DVD
Installation
( ) ( ) ( ) L ( )
R
EXTERNAL SPEAKER
AC INPUT
Camcorder
Video Game Set
( ) ( ) ( ) ( )
R L
EXTERNAL SPEAKER
AC INPUT
S-VIDEO (R) AUDIO (L)
Owner's Manual 13