Chaparral 926W Assembly Instructions Manual

Hobby cart

Advertisement

Quick Links

Presented by Whittier Wood Products
TOOLS REQUIRED: Phillips Screwdriver, Mallet or Padded Hammer, Wood Glue
BEFORE BEGINNING ASSEMBLY, check that the quantities of
Please contact Whittier Wood Products customer service department directly for
We will replace any parts which are defective, missing or damaged during assembly.
If you live in the U.S. or Canada, you can reach us toll free at: 800-653-3336.
All other customers can reach us by calling 541-687-0213, faxing 541-687-2060
Customer service personnel can be reached Monday-Friday, 7:00 A.M. to 5:00 P.M. Pacific time.
A message can be left for customer service 24 hours a day, seven days a week.
When contacting us, please provide the furniture model number, part letter,
quantity needed, reason for replacement and your full name and address
along with a telephone number in case we need to contact you.
Your parts will be sent from our Eugene,Oregon factory within two working days from the time
WHITTIER WOOD PRODUCTS • P.O. BOX 2827 • EUGENE, OREGON 97402 • (541) 687-0213
INSPECT YOUR FURNITURE PERIODICALLY FOR ANY LOOSE GLUE JOINTS OR SCREWS, OR ANY OTHER
PROBLEM WHICH MAY BE AFFECTING THE STABILITY OF YOUR FURNITURE. TIGHTEN OR REPAIR AS NEEDED.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
the parts received match those on the parts list.
SERVICE POLICY:
or writing to P.O. Box 2827, Eugene, OR-USA 97402.
we receive the request. Please allow 5-10 days for delivery.
Chaparral Furniture is presented by:
replacement parts.
926W
Hobby
Cart
Do not climb, sit, or
stand on this piece of
furniture.
Do not overload drawers
on this unit.
Before loading this unit,
check all screws and
supports for tightness.
FOR NORMAL HOUSEHOLD USE ONLY.
NOT RECOMMENDED FOR
COMMERCIAL USE.
4/04

Advertisement

Table of Contents
loading

Summary of Contents for Chaparral 926W

  • Page 1 Your parts will be sent from our Eugene,Oregon factory within two working days from the time we receive the request. Please allow 5-10 days for delivery. Chaparral Furniture is presented by: WHITTIER WOOD PRODUCTS • P.O. BOX 2827 • EUGENE, OREGON 97402 • (541) 687-0213 INSPECT YOUR FURNITURE PERIODICALLY FOR ANY LOOSE GLUE JOINTS OR SCREWS, OR ANY OTHER PROBLEM WHICH MAY BE AFFECTING THE STABILITY OF YOUR FURNITURE.
  • Page 2 — Qty. 36 — Qty. 18 — Qty. 26 Qty. 12 F — Catch Plate — G — Magnetic E — Caster — H — Hinge — Qty. 1 Catch — Qty. 1 Qty. 4 Qty. 2 Page 2 – 926W...
  • Page 3 2. Glue three Dowels (D) in the top edge of each Side. Spread a little glue in dowel holes in the Top and slide down over the Dowels. Fasten in place with Phillips Screws (A) through the pocket drilled holes in the Sides. 926W – Page 3...
  • Page 4 3. Attach the Back (05) in the notches in the Top and Bottom and fasten with Phillips Screws (C). STEP 4 x 16 4. Attach a Caster (E) in each bottom corner using Phillips Screws (B) in the prepunched holes. Page 4 – 926W...
  • Page 5 Slide the Drawer Bottom (08) into the grooves in the drawer sides and the drawer front. Attach the Drawer Back (09) to the drawer sides with Phillips Screws (A) through the predrilled holes. Repeat for the other drawers. 7. Slide the drawers in the unit. 926W – Page 5...
  • Page 6 Attach the Catch Plate (F) to the inside of the door with Phillips Screws (C) in the prepunched holes. STEP 9 9. Hang the door on the hinges. To adjust the door, loosen the screws in the elongated holes. Page 6 – 926W...
  • Page 7 926W Presentada por Whittier Wood Products Carro de Artes Manuales No se suba, no se siente ni se pare sobre este mueble. No cargue en exceso los cajones de este mueble. Antes de cargar o mover este mueble, compruebe que todos los tornillos y soportes estén...
  • Page 8: Lista De Piezas

    926W Carro de Artes Manuales LISTA DE PIEZAS Antes de comenzar a armar, verifique que haya recibido todas las piezas que se listan en la lista de piezas que se presenta a continuación. Cant. Cant. 01 Panel lateral izquierdo ....01 LISTA DE TORNILLERÍA...
  • Page 9: Outils Nécessaires

    926W Présenté par Whittier Wood Products Chariot Hobby Ne pas monter, s’asseoir ni se mettre debout sur cet article d’ameublement. Ne pas surcharger les tiroirs de cet article d’ameublement. Avant de charger ou de déplacer cet article d’ameublement, vérifier si toutes les vis et tous les supports sont solidement attachés.
  • Page 10: Instructions De Montage

    (B) que vous introduisez dans les trous préforés. Fixez le côté tige des charnières (H) au côté droit au moyen des vis cruciformes (C) que vous introduisez dans les trous préforés. 926W FR – Page 2...
  • Page 11: Getting Started

    Presented by Whittier Wood Products FINISHING HINTS CHOOSING THE FINISH: 1. Choose a finish that will meet your expectations for the product you are finishing. Are you matching existing furniture or do you want a “natural” finish? Is the piece to be functional, decorative or both? The answers to these questions may affect the type of finish you choose.
  • Page 12 STAINING: 1. Read and follow label directions. Stir stain well before starting. 2. Test stain on an inconspicuous spot on your project, or use the sample chip if one is provided. The sample chip must be sanded in the same way as your furniture kit to ensure the piece will accept the stain similarly.
  • Page 13: Para Comenzar

    Presentada por Whittier Wood Products SUGERENCIAS PARA EL ACABADO SELECCIÓN DEL ACABADO: 1. Elija un acabado que cumpla con las expectativas para el producto a ser acabado. ¿Debe hacer juego con otros muebles o se desea un acabado “natural”? ¿Ha de ser funcional, decorativo o ambas cosas? Las respuestas a estas preguntas pueden afectar el tipo de acabado que se seleccione.
  • Page 14 LA TINTURA: 1. Lea y siga las indicaciones del rótulo. Mezcle la tintura bien antes de comenzar. 2. Pruebe la tintura en un punto discreto del proyecto o utilice la muestra provista, si se incluye. La muestra deberá estar lijada del mismo modo que el mueble para asegurar que la pieza acepte la tintura del mismo modo. Aplique por lo menos una capa de la capa superior encima de la muestra de tintura, ya que también afecta el aspecto de la tintura.
  • Page 15 CONSEILS Présenté par Whittier Wood Products DE FINITION CHOIX DE L’ENDUIT DE FINITION : 1. Choisissez un enduit de finition qui réponde à ce que vous attendez du meuble. Souhaitez-vous l’harmoniser à votre mobilier actuel ou voulez-vous un aspect naturel ? Le meuble est-il destiné à être fonctionnel, décoratif ou les deux ? Le type d’enduit de finition que vous choisissez dépend des réponses à...
  • Page 16 TEINTURE : 1. Lisez et suivez les instructions figurant sur l’étiquette. Mélangez bien la teinture avant de commencer. 2. Testez la teinture sur une surface non visible de votre projet, ou utilisez le copeau échantillon, s’il a été fourni. Vous devez le poncer de la même façon que votre meuble en kit pour assurer que ce dernier acceptera la teinture de la même manière.

Table of Contents