Selecting A Supported Display Mode - Lenovo ThinkVision 724L-10 User Manual

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to
reattach the CRT monitor temporarily until you have re-configured the system;
preferably to 1920 x 1080 at 60 Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
480p (640x480)
480p (720x480)
720p
1080i
1080p
720x400
640x480
800x600
1024x768
1280x1024
1440x900
1600x900
1680x1050
1920x1080
Timing Refresh rate(Hz)
60Hz
60Hz
50/60Hz
50/60Hz
50/60Hz
70 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
2-8
Chapter 2.