Panasonic Lumix DC-FT7 Operating Instructions Manual page 174

12. Connecting to other equipment
• Use a battery with sufficient battery power. If the remaining battery power becomes low while
the camera and the PC are communicating, the alarm beeps.
Disconnect the USB connection cable safely. Otherwise, data may be destroyed.
• Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
About the folder structure of the camera
∫
• The content (folder structure) on the card of this unit is as follows.
• Card
DCIM
100_PANA
P1000001.JPG
P1000002.JPG
101_PANA
999_PANA
MISC
PRIVATE
• A new folder is created when pictures are taken in the following situations.
– After [No.Reset] (P137)
– When a card containing a folder with the same folder number has been inserted
(such as when pictures were taken using another maker of camera)
– When there is a picture with file number 999 inside the folder
DCIM:
1 Folder number
2 File number
3 JPG:
MP4:
in the [Setup] menu has been executed
174
Images
Still pictures
MP4 Motion pictures
4K burst file