Materials; Certification - Gradient GO Series User Manual

Canopy
Upper sail - leading edge
Upper sail - rear parts
Bottom sail
Ribs
Diagonals
Reinforcements
Reinforcements
Reinforcements
Suspension lines
Lines-top level
Lines-top level
Lines-top level
Lines-top level
Lines-top level
Lines-bottom level
Lines-bottom level
Lines-bottom level
Brake lines
Lines-top level
Lines-middle level
Lines-bottom level
Risers
Webbing
Pulleys Speed-system
Pulleys Brakes
Carabiners
Go is EN-A and LTF-A certified in all sizes.
The EN/LTF certificate for each Go is located on a rib in the middle of canopy. Certification is valid for
the use with all ABS harnesses. This type of harness allows a certain degree of adjustment to be made
to the length of the waist strap. Between 40cm (TOW < 80kg), 44cm (80kg < TOW < 100kg) and 48cm
(TOW > 100kg) - with regard to size of the glider - is the recommended distance between the carabiners.
In common with all other paragliders, when looser cross-bracing is used while flying the Go, the pilot's
weight-shift control is greater. The glider is also more sensitive to the movement in the surrounding
air. When cross-bracing is tighter, the pilot feels subjectively more stable, however turning by weight-
shift is less effective.
WARNING: The Go paraglider is only built for hill or tow launching. It is not built to withstand jumping
from a plane, balloon, building or for any jumps where there is a belated opening of the canopy. Use of
subsidiary motor (eg paramotoring) has not been tested by the manufacturer or by any other testing
body.
Pilot's manual for Go

2.3. Materials

Porcher Marine 9017 Skytex 38, E25 Universal, 38 g/m
Porcher Marine 9017 Skytex 38, E25 Universal, 38 g/m
Porcher Marine 9017 Skytex 38, E25 Universal, 38 g/m
Porcher Marine 9017 Skytex 40, E29 Hard, 40 g/m
Porcher Marine 9017 Skytex 40, E29 Hard, 40 g/m
Porcher Marine 6098 Laminated Skytex Film, 120 g/m
Porcher Marine 6391 SR-170, 165 g/m
Nylon Rod Ø2,00 mm
Edelrid Dyneema 7850-160, Ø1,50 mm
Edelrid Dyneema 7850-130, Ø1,30 mm
Edelrid Dyneema 7850-100, Ø1,10 mm
Edelrid Dyneema 7850-080, Ø1,00 mm
Edelrid Aramid 7343-140, Ø1,30 mm
Edelrid Aramid 7343-280, Ø1,80 mm
Edelrid Aramid 7343-230, Ø1,70 mm
Edelrid Aramid 7343-190, Ø1,50 mm
Edelrid Dyneema 7850-080, Ø1,00 mm
Edelrid Aramid 7343-140, Ø1,30 mm
Edelrid Dyneema A-10/N-300-024, Ø2,50 mm
Mouka Tišnov PAD, 15 mm, 22 mm
Austrialpin FL12A
Riley RM 302
Maillon Rapide MRSI03.5 S12, Maillon Rapide MRDI03.5

3. CERTIFICATION

www.gradient-gliders.com, info@gradient.gliders.com
2
2
2
2
2
2
2
4