Table of Contents
Advertisement
3
Changing the pre-fi lter
The pre-fi lter protects the motor by
absorbing micro-particles that the
dust bag can not keep. Change the
pre-fi lter with every fi fth dust bag. The
pre-fi lter is located behind the dust
bag. Always use original fi lters.
4
Changing the fi lter
The (H)EPA fi lter cleans the exhaust
air from micro particles the dust bag
can not keep. The (H)EPA fi lter can
not be brushed or washed clean if not
mentioned. Change the (H)EPA fi lter
once a year.
4a
One Basic:
Open the fi lter door by pressing the
button and pulling the door out. Place
the new fi lter in the frame. Press the
fi lter door in place again with a hard
fi nger pressure.
4b
One Prime and Clean Air:
Open the fi lter door by pulling out the
catch. Remove the door. Place the
new fi lter in the frame and close the
fi lter door again. Lock the door by
pushing the catch back in place.
Adjust the suction power
Sliding valve on the bent tube
The suction power is maximal with the
sliding valve closed and minimal when
all open. Adjust the suction power by
putting the sliding valve in the desired
position.
Power regulation
The suction power is adjusted by turn-
ing the button on the machine.
Tip: Adjust smaller suction power to
reduce noise and pull force.
Parking the tube and nozzle
5
There are two grooves for parking.
One located on the underside to use
when machine stands on the back,
and the other on the back to use when
the machine is standing on its wheels.
6
Storability
Release the hose strap on the front of
the machine. Then raise the transport
handle and wrap the hose around the
machine. Remount the strap.
One
EN
DE
FR
ES
PT
IT
NL
SV
NO
DA
FI
ZH
9
Advertisement
Table of Contents
