Advertisement
Quick Links
Safety Instructions
This manual contains the complete operating and basic maintenance instructions for the S326R
Precision Cleaver. Please review this manual carefully before using the S326R Precision Cleaver.
The following safety instructions must be followed whenever this product is operated, serviced, or
repaired. Failure to comply with any of these instructions or with any precaution or warning contained
in this manual is in direct violation of the standards of the design, the manufacturer, and the intended
use of the instrument. FURUKAWA ELECTRIC CO., LTD. assumes no liability for the customer's
failure to comply with these requirements.
!
CAUTION
!
ATTENTION
Please contact FURUKAWA ELECTRIC CO., LTD. with any questions relating to the description of this
manual.
In no case will FURUKAWA ELECTRIC CO., LTD. be liable to the buyer, for any consequential or
indirect damage which is caused by product failure, malfunction, or any other problem.
・ Avoid soaking the S326R with water. Doing so may cause malfunction.
・ Do not drop, throw, and handle it roughly. Doing so may cause machine's malfunction.
・ Do not use in a humid, dirty, or unstable site. Doing so may cause malfunction.
・ Please be cautious when disposing of fibers from the fiber waste bin. Scattered fibers may cause
injury.
・
The fiber waste bin for loose fiber must be installed into the S326R during operation, otherwise there is
danger for loose fiber to scatter.
・ Use an appropriate tool when loosening or tightening the set screw to fix the single fiber adapter to the
unit and gently tighten the screw.
・
Strip the fiber so that 14 to 25mm is exposed passed your aimed cleave length. This will allow the
automatic fiber waste disposal feature to work properly. For instance：
In case of 16mm cleave length, remove the coating more than 30mm(=16+14), and less than
41mm(=16+25).
・ Please clean the fiber with alcohol after stripping the coating material before setting it on to S326R.
・
Do not use Organic solvent (e.g. Acetone) to clean the rubber pads.
S326R Precision Cleaver
Operating Instructions
・ Please read entire manual prior to usage.
・ This manual must be kept with the S326R Precision Cleaver.
Safety Instructions
!
Failure to comply with any of the instructions, which are
indicated by this symbol, may cause serious injury or
damage to the machine.
Failure to comply with any of the instructions, which are
indicated by this symbol, may cause the device to function
improperly and degrade the performance.
ATTENTION
FTS-B-581-1
Issue 1：Oct. 2019
Advertisement
Summary of Contents for Fitel S326R
- Page 1 ・ Please be cautious when disposing of fibers from the fiber waste bin. Scattered fibers may cause injury. ・ The fiber waste bin for loose fiber must be installed into the S326R during operation, otherwise there is danger for loose fiber to scatter. ATTENTION ・...
- Page 2 Ensure that the stripped fiber is long enough to reach the pinch roller. S326R need to touch fiber holder at holder stage end. For single or ribbon fiber cleaving, please use the fiber Holder holder (Optional parts).
- Page 3 ATTENTION：During cleaving operation, please do not touch " Lid " and " Pinch roller lid ". 3) Open main body lid and remove the fiber from the unit. 5.2. Disposing of waste fiber Dispose of waste fiber as follows after completion of work and before transporting the unit. 1) Grab the sides of the waste bin box with fingers and pull it out.
- Page 4 7. Pinch Roller Maintenance S326R has an automatic waste fiber disposal function. To keep it operating properly, clean the pinch roller with cotton swab soaked in alcohol after each use. After repeated use, abrasion may form on the rubber of the pinch roller.