Dell OptiPlex 5055 Tower Owner's Manual page 59

Option
SATA Operation
Drives
Smart Reporting
USB Configuration
USB PowerShare
Audio
Miscellaneous Devices
Table 7. Video
Option
Multi-Display
Primary Display
Description
• COM4 (Disabled by default)
Allows you to configure the operating mode of the integrated hard drive controller.
• Disabled = The SATA controllers are hidden
• AHCI (Enabled by default)
• RAID ON = SATA is configured to support RAID mode (Disabled by default)
Allows you to enable or disable the various drives on-board:
• SATA-0 (enabled by default)
• SATA-1
• SATA-2
• SATA-3
• M.2 PCIe SSD-0
This field controls whether hard drive errors for integrated drives are reported during system startup.
The Enable Smart Reporting option is disabled by default.
Allows you to enable or disable the integrated USB controller for:
• Enable Boot Support
• Enable Front USB Ports
• Enable Rear USB Ports
All the options are enabled by default.
This option allows you to charge the external devices, such as mobile phones, music player. This
option is disabled by default.
Allows you to enable or disable the integrated audio controller. The option Enable Audio is selected by
default.
• Enable Microphone
• Enable Audio
• Enable Internal Speaker
The options are selected by default.
Allows you to enable or disable the Miscellaneous Devices. The option are
• Enable Secure Digital (SD) Card (Enabled by default)
• Secure Digital (SD) Card Read-Only mode
Description
The option is selected by default.
Allows you to select the primary display when multiple controllers are available in the system.
• Auto (default)
• Integrated Graphics
NOTE: If you do not select Auto, the on-board graphics device will be present and enabled.
System setup 59