The Singing Machine SML2082BTBK Instruction Manual page 16

Operation
Using the LINE IN Jack
1
2
4
3
5
1
Connect the unit as described
previously (see page 6). Press the
POWER ON/OFF button to turn the
unit on.
2
Connect the external unit to the
LINE IN Jack on the front of this unit.
Connecting an external unit will allow
the audio to be played through your
Singing Machine.
Notes:
• It is highly recommended to set the
volume on the auxiliary unit to 1/3 or
lower to avoid distortion.
• Skipping files/tracks is not possible in this
unit when using an external device.
3
Repeatedly press the FUNCTION
button to select the LINE IN mode;
"AU" will appear in the display.
4
Adjust the volume using the MASTER
VOLUME control on this unit or your
external device's volume control.
5
Connect microphone(s) as shown on
page 5, and slide the ON/OFF switch
on the microphone to the ON position.
— 15 —