Table of Contents
Advertisement
External Control Commands
Other optional settings include:
Field
Baud Rate
Parity
Stop Bit
Data Bit
Be sure that the control device and Firefly's COM port settings are
the same.
For Laserdisc Video serial communications, "LDV" must be selected in
the Command Mode under System Settings."VCC" is set for factory
default.
Error Codes
If Firefly acknowledges a command, the return from the player will be <R>.
Anytime an invalid command or address argument is received, that command will
be ignored and an error code will be returned. In the event that the command was
global, again each channel will report back independently.
The following table describes the system error codes:
Code
Message
NAK
Communication
Error
E06
Missing Argument
E11
Playlist not loaded
E12
Search Error
142
Setting
Either 4800 or 1200
Odd or Even
2
7
Meaning
Command or address argument
cannot be parsed - invalid syntax.
Necessary parameter is not
specified.
This error will occur any time a
player control command is
received while no playlist is loaded.
Search or stop marker address
cannot be found.
Advertisement
Table of Contents
