Download Print this page

Fluxamp FLX8000 User Manual

Jump starter battery pack

Advertisement

Quick Links

Jump Starter Battery Pack
FLX8000

Advertisement

loading

Summary of Contents for Fluxamp FLX8000

  • Page 1 Jump Starter Battery Pack FLX8000...
  • Page 2 Thank you for choosing the FLUXAMP Jump Starter model FLX8000. Always follow basic safety precautions when using electronics or jump starting a vehicle. Read all instructions carefully. Please keep this instruction manual for easy reference or you can download an electronic...
  • Page 3 A clean terminal will provide the best conductivity between your clamps, Do not attach clamps to FLX8000 yet! First, securely attach the black clamp to the vehicle's negative (-) battery terminal, then the red clamp to the vehicle's positive (+) battery terminal.
  • Page 4 Operation Guide: Indicator Lights The FLX8000 Jump Starter has 5 indicator lights to determine the amount of power in the unit. • Press the on/off switch to activate the lights. The display as below shows the level of power in relation to the number of lights illuminated.
  • Page 5 The unit will fully charge in approximately 4 hours. • Charging a Phone, Tablet or Other USB Devices The FLX8000 Jump Starter comes with two USB discharging port located at the side of the unit: • Select appropriate connector and connect it to your smartphone, tablet or USB device you want to charge.
  • Page 6: Important Safety Information

    FLUXAMP is not responsible. • Always read all instructions carefully before using your FLX8000 Jump Starter. Do not submerge your FLX8000 Jump Starter in water, or expose it to rain or mois- • ture. •...
  • Page 7 If any corrosive liquid comes in contact with your skin or eyes, imme- diately wash with running water and consult a doctor. • Your FLX8000 must be disposed of properly when it is no longer able to be used. You need to recycle your lithium-ion battery at a local facility. •...
  • Page 8: Troubleshooting

    How many USB devices can the FLX8000 Jump Starter charge at once? FLX8000 has 2 x 2.1A USB port , it can charge 2 x iPad at the same time. What is the lifespan of the FLX8000 Jump Starter? The FLX8000 Jump Starter can be fully charged and discharged up to 1000 times under ideal conditions.
  • Page 9 Your engine is too powerful for your FLX8000. Our batteries work very hard to supply the power you need, but some engines • demand more than your FLX8000 can give. You may want to try the next larger jump starter. Your battery terminals are dirty: Build-up on your battery terminals may be hindering conductivity.
  • Page 10: Parts List

    I connected my FLX8000 to the charger, but there are no indicator lights blinking. • Check that the charger is securely attached to the FLX8000 input port. • You may have a faulty outlet. Try plugging your FLX8000 charger into an alternate •...
  • Page 11 FLUXAMP. FLUXAMP shall not In any way be liable to you or any third party for any damages you or any third party may suffer as a result of use, Intended or unintended, or misuse of this product in conjunction with any device, equipment or accessory other than the appropriate device or equipment for which this product is designed.