Electronic Vibration Reduction - Nikon D500 Professional Setting Manual

Starting Recording with the Shutter-Release Button
If Record movies is assigned to the shutter-release button
and the live view selector is rotated to 1, you can start live
view by pressing the shutter-release button halfway and
start and end recording by pressing it all the way down. To
prevent camera shake, you can mount the camera on a tri-
pod and start and end recording using an optional remote
cord (such as the MC-36A or MC-30A) or wireless remote
controller (such as the WR-R10/WR-T10).
To prevent unintended operation of the a button, select
Disable for Custom Setting f8 (Live view button options).

Electronic Vibration Reduction

l
To enable electronic vibration reduction in movie mode,
select On for Electronic VR in the movie shooting menu.
Electronic vibration reduction is best with hand-held cin-
ematography; select Off when the camera is on a tripod.
Note that if electronic vibration reduction is on and DX is
selected for Choose image area (page 9), the angle of view
will be reduced and the edges of the frame cropped out.
Electronic vibration reduction is not available at a frame
size of 3840 × 2160 (page 8). Regardless of the option cho-
sen for ISO sensitivity settings > ISO sensitivity (mode M)
in the movie shooting menu (page 10), the upper limit when
electronic vibration reduction is on is ISO 51200.
20