Sony SHAKE-X70D Operating Instructions Manual page 18

 Audio input and output jacks
Use an audio cable (not supplied) to make either connection as follows:
AUDIO/PARTY CHAIN IN (TV) L/R jacks
• •
•
— Connect to the audio output jacks of a TV or an audio/video
equipment. The sound is output through this system.
•
— Connect to another audio system to enjoy the Party Chain function
(page 50).
AUDIO/PARTY CHAIN OUT L/R jacks
• •
•
— Connect to the audio input jacks of an optional equipment.
•
— Connect to another audio system to enjoy the Party Chain function
(page 50).
 FM ANTENNA terminal
Find a location and an orientation that provide good reception when you
set up the antennas.
Keep the antenna away from the speaker cables, the AC power cord (mains
lead) and the USB cable to avoid picking up noise.
 Speakers
PARTY LIGHT L/R terminals
• •
Connect the Party Light connector of the speaker to this terminal. The
lighting on the speakers will react according to the music source. You can
select the Party Light and Speaker Light according to your preference
(page 55).
LEFT SPEAKER and RIGHT SPEAKER terminals
• •
(SHAKE-X70D only)
Connect the speaker connector of the speaker to this terminal.
SPEAKERS L/R terminals
• •
(SHAKE-X30D and SHAKE-X10D only)
Connect the speaker connector of the speaker to this terminal.
18
GB
Extend the FM lead
antenna horizontally