Water Intake Fault - Miele G 4993 Operating Instructions Manual

Water intake fault

Problem
The dishwasher
stopped working shortly
after the program
started.
The warning buzzer is
sounding.
The Intake/Drain indica-
tor light is flashing on
and off.
The dishwasher stops
during a program.
The warning buzzer is
sounding.
The Intake/Drain indica-
tor light flashes.
Fault code  or  ap-
pears in the time dis-
play.
Frequently Asked Questions
Possible cause and solution
The water supply is turned off.
 Turn on the water supply all the way.
Before fixing the fault:
 Turn the dishwasher off with the  button.
There is a problem with the water intake.
 Turn on the water supply fully and start the pro-
gram again.
 Clean the water intake filter (see "Frequently asked
questions").
 The flow pressure at the connection point is lower
than 7.25 psi.
Contact a plumber.
55