Firmware / Library; Device Info - Nedap ANPR ACCESS Installation Manual

ANPR ACCESS | INSTALLATION GUIDE
Configuration

5.3.4 FIRMWARE / LIBRARY

It is possible to update the ANPR firmware library. The firmware library is one file,
containing the ANPR operating system, recognition library and configuration. The
installed recognition library supports all European countries. The firmware package
file is distributed as a .bin-file.
Two possible update options are available:
Upgrade firmware library keeping current settings.

Upgrade firmware library with default settings (network settings will remain

unchanged).
Upgrade procedure (from PC to ANPR):
Click the Browse-button below the preferred update method and select the
firmware library file (.bin-file). After the file has been selected, click the Upload-
button and confirm the operation. When the update completes, the user is asked to
reboot the device.
Backup download procedure (from ANPR to PC):
Press the Download-button to save a compressed bin-file containing the ANPR
firmware and all its user defined parameters. This feature is very useful when
duplicating the same configuration onto another device or keeping the file for
backup purposes. The bin-file can be directly loaded to an ANPR system, using either
of the available upgrade options.

5.3.5 DEVICE INFO

This page displays information about the ANPR firmware library, device hardware
status and diagnostic information:
Version
Firmware version
OCR lib version
TOS version
FPGA Version
Device Status
Image Sensor OCR
board Serial Number
Board code
Board revision
MAC Address
Temperature
Flash file system size
Buffering SD size
Storage SD size
Diagnostic Status
Status
Internal parameters
Last check time
Boot time
Status Secure Digital
= VEGA ACCESS 10.6.3 NLD-EU Mar 14 2013
12:02:53
= Tattile Plate Reader Ver.3.69.01
= 4.33.12
= 0
= CCD_1300x1000_BW (74)
= 583447
= 573
= 2
= 0x0050C2BE1442
= Not Available
= 40312 KByte
= 3.8 GB (READY)
= 3.8 GB (READY)
= OK
= M:0x05e5 C:0x05e5 A:0x0000 W:0x0000
R:0x0000
= 17/09/2013 09:01:00,298
= 29/08/2013 07:16:52,680
= OK
Note
It is recommended, to use
the internet explorer to
update the firmware. Other
browsers may not work or
cause problems with the
ANPR firmware.
During the update it is very
important to make sure the
ANPR is not powered off.
Please do not close the
HTTP connection until the
download is completed
29/36