Motion Detection; Setting Up Motion Detection - Security Tronix ST-NVR4CH-I Quick Start Manual

Motion Detection

SETTING UP MOTION DETECTION

From the MAIN MENU, select EVENT in the SETTING section, then
select DETECT on the left side of the window.
Note: Changes in this menu must be made per channel to avoid
possible recording conflicts.
Select a channel number to edit using the CHANNEL drop-down menu,
then click the ENABLE checkbox. Next click the RECORD CHANNEL
checkbox, then click the corresponding RECORD CHANNEL number to
highlight it (ie: if editing channel 1, select RECORD CHANNEL 1).
Repeat this process for all channels on which motion detection is
desired. When finished, click APPLY at the bottom of the screen, and
then click SAVE to return to the MAIN MENU, or continue on to the
next section to edit motion detection regions.
15