Table of Contents
Advertisement
Note: The parking brake lever should release.
2. Gradually release the brake pedal.
Positioning the Seat
The seat can move forward and backward. Position the
seat where you have the best control of the machine
and are most comfortable.
1. Raise the seat and loosen the adjustment knobs
(Figure 4).
1. Adjustment knobs
2. Move the seat to the desired position and tighten
the knobs.
Operating the Headlights
The headlights are an integral function of the ignition
switch. Turn the ignition key clockwise to the Lights
position.
Using the Cruise Control
1. Accelerate the machine to the desired speed.
2. Push the cruise control switch On (Figure 3).
3. To decelerate, push the cruise control switch Off or
slowly apply the brake pedal.
Note: Note: The battery must be fully charged for
the cruise control to operate reliably.
Figure 4
Hour Meter
The hour meter is located on the instrument panel
(Figure 3) and shows the total operating hours of the
machine.
Using the Blade Control (PTO)
The blade control (PTO) knob engages and disengages
power to the blades.
Engaging the Blades
1. Depress the brake pedal to stop the machine.
2. Pull the blade control (PTO) knob out to the
Engaged position (Figure 5).
1. Blade control (PTO)
2. Engaged
Note: The blade control (PTO) light on the dash
turns on when you engage the blades (PTO) as
shown in Figure 6.
1. Grass collector warning
light
2. Parking brake light
13
Figure 5
3. Disengaged
Figure 6
3. Blade control (PTO) light
Advertisement
Table of Contents
