Boss KATANA Series Owner's Manual page 5

[BANK] button
Artist only
Switches between BANK A and BANK B.
MEMO
To switch between BANK A and BANK B on the KATANA-50,
KATANA-100, KATANA-100/212, or KATANA-HEAD, hold down
the [PANEL] button for approximately one second when any one
of the [CH1]--[CH4] buttons are selected.
The selected [CH1]–[CH4] button blinks, and the bank switches
between BANK A and BANK B. When BANK B is selected, the
[PANEL] button blinks slowly.
* You can't switch banks while PANEL is selected.
[CH 1]–[CH 4] buttons
The [CH 1]–[CH 4] buttons (CH 1–CH 2 on the KATANA-50)
remember the settings of all top panel knobs (except for the
[MASTER] knob) and buttons. When you press and hold a button for
one second, the panel settings are stored.
* You can make the settings back to the factory state by turning
the power on while holding down the [PANEL] button.
[PANEL] button
Makes the unit sound using the current settings of the panel knobs.
9
[CABINET RESONANCE] switch
Adds the resonance of a connected speaker cabinet.
Value Explanation
VINTAGE The warm and sweet sound of a vintage cabinet.
MODERN A modern cabinet sound notable for a tight low-end.
DEEP Sound with powerful low-end as well as a distinctive edge.
10
[LINE OUT AIR FEEL] switch
Specifies the sound of the LINE OUT/PHONES/USB Post Out (p. 10).
Value Explanation
REC A distantly-miked sound for recording.
LIVE
A close-miked sound for live.
A sound providing a good blend of closed-miked and
BLEND distantly-miked sound that can be broadly used for live or
recording.
11
[POWER] switch
Turns the power of the KATANA on/off.
Artist only
Artist only
Panel Descriptions
5