Table of Contents
Advertisement
Quick Links
ADVANCEARC 160/200
MMA (STICK) WELDERS
OPERATING INSTRUCTIONS
230V 50HZ
IGBT
DIRECT
SPIKE/
VOLTAGE
CONSTANT
LIFT TIG
POWER FACTOR
10A PLUG
INTELLIGENT
IP23 CORROSION
MULTI VOLTAGE
SINGLE
INVERTER
CURRENT
GENERATOR
REDUCTION
CURRENT
(OPTIONAL
CORRECTION
(ADVANCEARC 160)
PROTECTION
& SALT SPRAY
110 - 230V
PHASE
TECHNOLOGY
OUTPUT
SAFE
DEVICE
TORCH)
SYSTEM
RESISTANT
www.strata.co.nz
Advertisement
Table of Contents
Summary of Contents for Strata ADVANCED ARC160
- Page 1 SPIKE/ VOLTAGE CONSTANT LIFT TIG POWER FACTOR 10A PLUG INTELLIGENT IP23 CORROSION MULTI VOLTAGE SINGLE INVERTER CURRENT GENERATOR REDUCTION CURRENT (OPTIONAL CORRECTION (ADVANCEARC 160) PROTECTION & SALT SPRAY 110 - 230V PHASE TECHNOLOGY OUTPUT SAFE DEVICE TORCH) SYSTEM RESISTANT www.strata.co.nz...
- Page 2 ADVANCEARC 160 • ADVANCEARC 200 Congratulations on your new Strata product! The Strata range from Euroquip uses latest technology design and engineering to produce welding products that combine market leading value and features with durability. Designed for discerning operators who seek professional results and product quality without the price tag of a full professional setup.
-
Page 3: Table Of Contents
ADVANCEARC 160 • ADVANCEARC 200 Contents Know Your Machine............5 Quick Start Guide..............6 Available Parts & Accessories...........7 Wiring Diagram..............8 Care & Maintenance............9 Electrodes.................9 Effects of MMA Welding Various Metals......10 Other Knowledge & Resources........10 Safety................11 Warranty.................19 www.strata.co.nz... - Page 4 SPIKE/ VOLTAGE CONSTANT INTELLIGENT IP23 CORROSION LIFT TIG POWER FACTOR MULTI VOLTAGE 10A PLUG SINGLE INVERTER CURRENT GENERATOR REDUCTION CURRENT PROTECTION & SALT SPRAY (OPTIONAL CORRECTION 110 - 230V (ADVANCEARC 160) PHASE TECHNOLOGY OUTPUT SAFE DEVICE SYSTEM RESISTANT TORCH) www.strata.co.nz...
-
Page 5: Know Your Machine
VRD protection is enabled standard for the overheating (due to exceeding duty cycle) is detected AdvanceArc 160/200. If it is not required, the feature and protection is activated. can be disabled by a Strata service dealer. When protection is activated, welding output will be disabled until the safety system senses the overload Tips & Tricks has reduced sufficiently and indicator lamp goes out. -
Page 6: Quick Start Guide
Contact with chine. Select Lift TIG welding mode (6) using the clean, bare metal, with no corrosion, paint or button (8). scale at the contact point. 2.5 Select the required output current using the cur- 1.2 Insert an electrode into the electrode holder and rent control knob (3). You are now ready to connect the electrode holder and work lead to weld! the positive welding power output socket (4). www.strata.co.nz... -
Page 7: Available Parts & Accessories
Supercito 4.0mm Electrodes (450mm) ETCPH7740 Supercito 4.0mm Electrodes (450mm) ETCPH7750 Supercito 5.0mm Electrodes (450mm) ETCPH7750 Supercito 5.0mm Electrodes (450mm) ETCPH56S25 Tenax 56S 2.5mm Electrodes (350mm) ETCPH56S25 Tenax 56S 2.5mm Electrodes (350mm) ETCPH56S32 Tenax 56S 3.2mm Electrodes (350mm) ETCPH56S32 Tenax 56S 3.2mm Electrodes (350mm) ETCPH56S40 Tenax 56S 4.0mm Electrodes (450mm) ETCPH56S40 Tenax 56S 4.0mm Electrodes (450mm) ETCPH56S50 Tenax 56S 5.0mm Electrodes (450mm) ETCPH56S50 Tenax 56S 5.0mm Electrodes (450mm) PDL15 Plug, 3 Pin 15A 250V straight PDL15 Plug, 3 Pin 15A 250V straight These accessories listed are available from your Strata Supplier. Refer to the Strata Catalogue, your Strata Supplier or look online at www.strata.co.nz for other accessories and consumables available. www.strata.co.nz... -
Page 8: Wiring Diagram
ADVANCEARC 160 • ADVANCEARC 200 Wiring Diagram www.strata.co.nz... -
Page 9: Care & Maintenance
This appliance is manufactured in accordance with relevant safety standards. Only experts must carry The work lead is connected to the negative polarity out repairing of electrical appliances, otherwise and is connected to the work piece. If in doubt consult considerable danger for the user may result. Use only the electrode data sheet. www.strata.co.nz... -
Page 10: Effects Of Mma Welding Various Metals
There are Please refer to Euroquip website a great number of electrodes used for specialised in- www.euroquip.co.nz/ Downloads.html dustrial purposes which are not of particular interest for everyday general work. These include some low for knowledgebase articles & operation videos. www.strata.co.nz... -
Page 11: Safety
WARNING! NOTE, used to address practices not related to per- Electromagnetic fields in close proximity to a sonal injury. heart pacemaker could cause interference, or failure of the pacemaker. The use of a Welder is NOT RECOMMENDED for pacemaker wearers. Consult your doctor. www.strata.co.nz... - Page 12 This enables better control of ment. Anyone not having extensive training in weld- the power tool in unexpected situations. ing and cutting practices should not attempt to weld. www.strata.co.nz...
- Page 13 2. Wear dry, hole-free insulating gloves and body 3. Enclose the work area with portable fire resistant protection. screens. Protect combustible walls, ceilings, floors, etc., from sparks and heat with fire re- 3. Insulate yourself from the work and the ground sistant covers. using dry insulating mats or covers. www.strata.co.nz...
- Page 14 10. Connect work piece to a good electrical ground. tended or out of service. 7. Use fully insulated electrode holders. Never dip 11. Do not touch the electrode while in contact with the holder in water to cool it or lay it down on the the work (ground) circuit. www.strata.co.nz...
- Page 15 1. Wear an AS/NZS approved face shield or safety is well ventilated, and if necessary, while wearing goggles. Side shields are recommended. an air- supplied respirator. The coatings and any 2. Wear appropriate safety equipment to protect the metals containing these elements can give off skin and body. toxic fumes if welded. www.strata.co.nz...
- Page 16 4. Never allow a welding electrode to touch any cyl- inder. 5. Use appropriate shielding gas, regulators, hoses, and fittings designed for the specific application; maintain them and their associated parts in good condition. 6. Turn your face away from the valve outlet when opening the cylinder valve. www.strata.co.nz...
- Page 17 ADVANCEARC 160 • ADVANCEARC 200 www.strata.co.nz...
- Page 18 ADVANCEARC 160 • ADVANCEARC 200 www.strata.co.nz...
-
Page 19: Warranty
Scan here to register your product tempted repair/ service by a party other than an Approved Service Agent, is not covered under warranty. http://www.euroquip.co.nz/Contact+Us/ Product+Registration+Form.html www.strata.co.nz... - Page 20 Congratulations on your new STRATA product. We are proud to have you as our customer and will strive to provide you with the best service and reliability in the industry. This product is backed by our extensive warranty and world-wide service network. To locate your nearest distributor or service agency visit www.
Need help?
Do you have a question about the ADVANCED ARC160 and is the answer not in the manual?
Questions and answers