Summary of Contents for Safety Technology International STI Wireless Driveway Monitor STI-V34150
Page 1
Installation and Operation Manual STI Wireless Driveway Monitor Part of the Wireless Alert Series Models: STI-V34150 - Battery Power Kit STI-V34100 - Solar Power Kit STI-34151 - Battery Powered Sensor STI-34101 - Solar Power Sensor Thank you for purchasing the STI Wireless Driveway Monitor. Your satisfaction is very important to us. Please take the time to read this manual carefully to get the most from your new product.
Page 2
Sensitivity Adjustment The factory default setting (HIGH) may be adjusted by changing the jumper position inside the sensor transmitter. 1. Unscrew cap. 2. Position the jumper to desired sensitivity (as shown). • LOW: Position jumper on the two bottom pegs. SENSOR TRANSMITTER •...
Page 3
WALL MOUNT (INCLUDED) MOUNTING STAKE NOT NEEDED FOR POLE MOUNTING MOUNT INSTALLATION TUBE CAP 12”MOUNTING TUBE MOUNTING STAKE To obtain optimal range 1. Place cap on tube. 2. Insert stake to opposite end of tube. 3. Place the tube (stake side down) into the ground within 3’ of the driveway and more than 25’...
Page 4
Warranty information Safety Technology International, Inc. warrants to the original consumer/purchaser that this product shall be free of defects in material and workmanship under normal use and circumstances for a period of one (1) year from the original date of purchase.