Advertisement
Quick Links
STI Wireless Driveway Monitor
Thank you for purchasing the STI Wireless Driveway Monitor. Your satisfaction is very important to us.
Please take the time to read this manual carefully to get the most from your new product.
How the product works
Because of its patented magnetometer sensor transmitter system, the Driveway Monitor will only be
triggered by cars or trucks - not people, animals and so forth. When a vehicle passes the Motion
Alert
Sensor Transmitter next to the driveway, the receiver unit inside the office or home sounds a
®
programmable message. The earth has a uniform magnetic field around it. A vehicle creates a slight
disturbance in the earth's field. The sensor transmitter detects this disturbance and transmits a signal
to the receiver.
Before you start
Refer to this drawing to become familiar with all the parts.
SENSOR
TRANSMITTER
CAP
SENSOR
TRANSMITTER
BASE
MOUNTING
TUBE CAP
12" MOUNTING TUBE
MOUNTING STAKE
BATTERY POWERED SENSOR
TRANSMITTER
Installation and Operation Manual
Part of the Wireless Alert Series
Models:
STI-V34150 - Battery Power Kit
STI-V34100 - Solar Power Kit
STI-34151 - Battery Powered Sensor
STI-34101 - Solar Power Sensor
SENSOR TRANSMITTER
2 "C" BATTERIES
(NOT INCLUDED)
WALL MOUNT (INCLUDED)
NOT NEEDED FOR POLE
MOUNT INSTALLATION
SENSOR
TRANSMITTER
SENSOR
TRANSMITTER
BOTTOM
MOUNTING
TUBE CAP
12" MOUNTING TUBE
MOUNTING STAKE
SOLAR POWERED SENSOR
TRANSMITTER
TM
PLASTIC FILM
REMOVE BEFORE USE
RECHARGEABLE AA
NiMH BATTERIES
SENSOR TRANSMITTER
BOTTOM SCREWS
WALL MOUNT (INCLUDED)
NOT NEEDED FOR POLE
MOUNT INSTALLATION
Advertisement
Related Manuals for Safety Technology International STI Wireless Driveway Monitor STI-V34150
Summary of Contents for Safety Technology International STI Wireless Driveway Monitor STI-V34150
- Page 1 Installation and Operation Manual STI Wireless Driveway Monitor Part of the Wireless Alert Series Models: STI-V34150 - Battery Power Kit STI-V34100 - Solar Power Kit STI-34151 - Battery Powered Sensor STI-34101 - Solar Power Sensor Thank you for purchasing the STI Wireless Driveway Monitor. Your satisfaction is very important to us. Please take the time to read this manual carefully to get the most from your new product.
- Page 2 Sensitivity Adjustment The factory default setting (HIGH) may be adjusted by changing the jumper position inside the sensor transmitter. 1. Unscrew cap. 2. Position the jumper to desired sensitivity (as shown). • LOW: Position jumper on the two bottom pegs. SENSOR TRANSMITTER •...
- Page 3 WALL MOUNT (INCLUDED) MOUNTING STAKE NOT NEEDED FOR POLE MOUNTING MOUNT INSTALLATION TUBE CAP 12”MOUNTING TUBE MOUNTING STAKE To obtain optimal range 1. Place cap on tube. 2. Insert stake to opposite end of tube. 3. Place the tube (stake side down) into the ground within 3’ of the driveway and more than 25’...
- Page 4 Warranty information Safety Technology International, Inc. warrants to the original consumer/purchaser that this product shall be free of defects in material and workmanship under normal use and circumstances for a period of one (1) year from the original date of purchase.