Table of Contents
Advertisement
Operation
Reheating Automatically
To reheat food, select the type of dish and the number of servings you want to reheat,
and the microwave automatically sets the reheating time.
1.
Press the Auto Reheat button repeatedly to select the type of dish you wish to
reheat. The initial serving size for each dish is one serving.
You can select up to four cups for casseroles and pasta reheat. Only one serving
is available for a plate of food.
The display shows the dish and quantity you have chosen.
2.
Use the number buttons to increase the serving size.
servings, press the 3 button(Refer to the Auto Reheat Chart
below for the servings).
The display shows the number of servings you
have selected:
3.
Press the Start button. The display will show Cooking Time.
Auto Reheat Chart
Item
Weight
Plate of food
1 serving
•
•
•
Casserole
•
•
Pasta Reheat
1-4 Cups
•
Setting and Using the Custom Cook Button
The Custom Cook button memorizes the time and power setting for a particular food.
Programming the Custom Cook Button
1.
Press the Custom Cook button. Press the button twice to delete the previous Custom
setting. The display shows "CUS".
2.
Use the Number buttons to enter the amount of cooking time. The display will show the
amount of time you have set.
3.
Press Power Level and use the Number buttons to enter the power level. The display
will show the power level you have set. You can set the Power Level from 0 to 9
1 = warm
3 = defrost
5 = medium
7 = medium high
9 = sauté
4.
Press the Custom Cook button again.
For example, for three
Remarks
Use only pre-cooked, refrigerated foods.
Cover plate with vented plastic wrap or wax
paper.
Contents
- 85-110 g meat, poultry or fish
( up to 170 g with bone)
- ½ cup starch
(potatoes, pasta, rice, etc.)
- ½ cup vegetables
(about 85-110 g)
Use only refrigerated foods.
Cover with lid or vented plastic wrap.
Stir foods well before serving.
2 = low
4 = medium low
6 = simmer
8 = reheat
0 =high
Using the Custom Cook button
Press the Custom button after memorizing a recipe, the press Start button. You can
check the power level while cooking is in progress by pressing the Power Level button.
Setting Cooking Times & Power Levels
Your microwave allows you to set up to two different stages of cooking, each with its own
time length and power level. The power level button lets you control the heating intensity
from Warm (1) to High (0).
One-stage Cooking
For simple one-stage cooking, you only need to set a cooking time. The power level is auto-
matically set to High. If you want to set the power to any other level, you must set it using the
Power Level button.
1.
Use the number buttons to set a cooking time. You can set a time from one second to
99 minutes, 99 seconds. To set a time over one minute, enter the seconds too.
example, to set 20 minutes, enter 2, 0, 0, 0 .
2.
If you want to set the power level to something other than High, press the Power Level
button, then use the number buttons to enter a power level.
Power Levels:
1 = PL:10
(Warm)
2 = PL:20
(Low)
3 = PL:30
(Defrost)
4 = PL:40
(Medium Low)
5 = PL:50
(Medium)
3.
Press the Start button to begin cooking. If you want to change the power level, press
Pause/Cancel before you press Start, and re-enter all of the instructions.
Some recipes require different stages of cooking at different temperatures. You can set
multiple stages of cooking with your microwave.
Multi-stage Cooking
1.
Follow steps 1 and 2 in the "One-Stage Cooking" section on the this page.
When entering more than one cooking stage, the Power Level button must be
pressed before the second cooking stage can be entered.
To set the power level at High for a stage of cooking, press the Power Level button
twice.
2.
Use the number buttons to set a second cooking time.
3.
Press the Power Level button, then use the number buttons to set the power level of
the second stage of cooking.
4.
Press Start to begin cooking.
You can check the Power Level while cooking is in progress by pressing the Power
Level button.
Microwave oven has priority independently from selection of Multi-phase.
Demonstration Mode
You can use the Demonstration Mode to see how your microwave oven operates without the
oven heating.
1.
Hold the 0 button and then press the 1 button.
To turn demo mode off, repeat step 1 above.
7
For
6 = PL:60
(Simmer)
7 = PL:70
(Medium High)
8 = PL:80
(Reheat)
9 = PL:90
(Sauté)
0 = PL:Hi
(High)
Advertisement
Table of Contents
