Panasonic TX-L32D25E Operating Instructions Manual page 9

TV
USB 2 port
CI slot
SD Card slot
HDMI4 terminal
AV3 terminals
Headphones jack
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
■
How to use remote control
Move the cursor / select the menu item
Access the menu / store settings after
adjustments have been made or options
have been set
MENU
Open the main menu
■
ON SCREEN HELP Instructions box - Operation guide
Example (Sound Menu):
Sound Menu
Mode Music
Bass
Treble
Balance
Headphone Volume
Surround Off
Volume Correction
Speaker Distance to Wall Over 30cm
MPX Stereo
Select
EXIT
Change
RETURN
Power and Timer LED
●
Standby: red
On: green
Timer Programming On: orange
Recording of Timer Programming, Direct TV Recording or One
Touch Recording is in progress: orange (flash)
Standby with Timer Programming On, Direct TV Recording One
Touch Recording: red with orange flash
●
When using the remote control, indicates the TV has received a
command.
C.A.T.S. (Contrast Automatic Tracking System) sensor
●
Senses brightness to adjust picture quality when "Eco Mode" in the
Picture Menu is set to "On" (p. 18)
Remote control signal receiver
●
Do not place any objects between the TV remote control signal
receiver and remote control.
1/2
0
0
0
11
0
Page up
Operation guide will help you.
Page down
Function select
●
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC signal) / Bass ("Music"
or "Speech" mode in the Sound Menu) / Treble
("Music" or "Speech" mode in the Sound Menu)
F
/ Balance / Auto Setup
Increases or decreases the channel
position by one. When a function is already
displayed, press to increase or decrease
TV the selected function.
When in Standby mode, switches TV On
(Press for about 1 second).
AV
Changes the input mode
Mains power On / Off switch
●
Switch On to turn on the TV or turn the TV to
Standby mode by the remote control
Move the cursor / adjust levels / select from
a range of options
BACK/
RETURN
Return to the previous menu
EXIT
Exit the menu system and return to the
normal viewing screen
9