Toro 78444 Operator's Manual page 15

11. If you wish to remove the pulley box, push the
latch release buttons on the front
TM
Attach-A-Matic
levers to open the latches holding the pulley box.
Remove the pulley box.
1
Figure 24
TM
1. Front Attach-A-Matic
button (one on each side)
TM
2. Front Attach-A-Matic
latches
12. Start the tractor and raise the attachment lift to
provide ample clearance to slide out the mower.
Then turn the ignition key to "STOP" to stop the
engine. Remove the ignition key.
13. Slide the mower out from the driver's right–hand
side of the tractor.
(Fig. 24) and raise the latch
2
m–3458
3. Pulley box
2
3
Installation
13