Replacing A Headlight Bulb - Yamaha WOLVERINE YFM35XW Owner's Manual

Hide thumbs Also See for WOLVERINE YFM35XW:
Table of Contents

Advertisement

2. Remove the blown fuse, and then install a
new fuse of the specified amperage.
Specified fuses:
Main fuse:
20.0 A
Headlight fuse:
15.0 A
Ignition fuse:
15.0 A
Signaling system fuse:
10.0 A
EWB02171
WARNING
Always use a fuse of the specified rating, and
8
never use a substitute object in place of the
proper fuse. An improper fuse or a substitute
object can cause damage to the electrical sys-
tem, which could lead to a fire.
3. Turn the key to "ON" and turn on the electrical
circuits to check if the devices operate.
4. If the fuse immediately blows again, have a
Yamaha dealer check the electrical system.
EBU25541

Replacing a headlight bulb

If a headlight bulb burns out, replace it as follows.
1. Remove the headlight bulb holder cover at the
rear of the headlight by pulling it off.
1. Headlight bulb holder cover
2. Remove the headlight bulb holder by pushing
it inward and turning it counterclockwise.
8-35

Advertisement

Table of Contents
loading

Table of Contents