Axis P3224-LV User Manual page 59

AXIS P3224-LV Network Camera
Troubleshooting
Poor rendering of H.264
images
Color saturation is different
in H.264 and Motion JPEG
Lower frame rate than
expected
Video and image problems, general
Image unsatisfactory
Storage and disk management problems
Storage disruption
Video cannot be recorded
SD card cannot be mounted
Ensure that your graphics card is using the latest driver. The latest drivers can usually be
downloaded from the manufacturer's website.
Modify the settings for your graphics adapter. Refer to the adapter's documentation for more
information.
See Performance Considerations on page 62.
Reduce the number of applications running on the client computer.
Limit the number of simultaneous viewers.
Check with the network administrator that there is enough bandwidth available.
Check in the AMC Control Panel (H.264 tag) that video processing is NOT set to Decode only
key frames.
Lower the image resolution.
Set a Capture Mode that prioritizes frame rate. Changing the capture mode to prioritize frame rate
will lower the maximum resolution. See Capture Mode on page 19.
The maximum frames per second is dependent on the utility frequency (60/50 Hz) of the Axis
product. See Technical Specifications on page 60.
Check the video stream and camera settings under Setup > Video > Video Stream and Setup >
Video > Camera Settings.
A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other
read or write problems occur. To identify the source of the problem, check the System Log under
System Options > Support > Logs & Reports. Depending on the problem, it might be necessary to
re-mount the storage device.
For information on how to set up a storage disruption alarm, see Events on page 36.
Check that the SD card is not write protected (that is, read only).
Reformat the SD card and then click Mount.
NOTICE NO NO TICE TICE
Formatting the card will remove all content, including all recordings, from the SD card.
59