Toro 74917 Operator's Manual page 35

5. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil
to bring it to the Full mark (Figure 48).
1
3
5
6. Start the engine and drive to a flat area. Check the
oil level again.
Changing the Engine Oil Filter
Service Interval: Every 200 hours
Note: Change the engine oil filter more frequently
when operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to Changing the
Engine Oil.
2. Change the engine oil filter (Figure 49).
2
4
6
G008796
Figure 48
1
3
5
Note: Ensure the oil filter gasket touches the engine
and then an extra 3/4 turn is completed.
3. Fill the crankcase with the proper type of new oil;
refer to Changing the Oil.
35
2
4
6
3/4
Figure 49
G008804
G008748