Table of Contents
Advertisement
Remove the wireless LAN antennas assembly from the base cover assembly.
Antenna locations
a
Wireless LAN auxiliary antenna (black)
b
Wireless LAN main antenna (gray)
Attention: When you route the cables, ensure that they are not subject to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds. Apply those labels when
you replace the base cover. For the labels that are not shipped with the new base cover, peel them off from
the old base cover, and adhere them to the new one.
The following illustration shows the location of each label for Windows 7 and Windows 10 based computer
models.
19
18
17
16
15
14
13
If the Windows Certificate of Authentication (COA) label
of the following:
5a
12
11
10
9
11
is attached to a part that is replaced, do one
Chapter 9
1
2
3
4
5
6
7
8
.
Removing or replacing a FRU
83
Advertisement
Table of Contents
