Recovering Back To Default Configuration - Planet WGSW-28040 Quick Installation Manual

9. Recovering Back to Default Configuration
 IP Address has been changed or admin password has been forgotten –
To reset the IP address to the default IP Address "192.168.0.100" or reset the
login password to default value, press the reset button on the front panel for
about 10 seconds. After the device is rebooted, you can login the Web interface
management within the same subnet of 192.168.0.xx.
WGSW-28040
Console
115200, N, 8, 1
28G Managed Switch
2 4 6
SYS 1 3 5
RESET PWR
Figure 9-1: WGSW-28040 Reset Button
8 10 12 14 16 18 20 22 24
7 9 11 13 15 17 19 21 23
1000
LNK ACT
13