Using Your Handheld Steamer - Shark S2901 Series Owner's Manual

Using Your Handheld Steamer

Your Shark
Multi-Function Steam Pocket
®
Lite is designed to clean surfaces that will
withstand high heat and moisture. Do not
use on unsealed wood surfaces (especially
wooden antique furniture), unglazed ceramic
tile, painted surfaces or surfaces that have
been treated with wax, oils, varnishes, or
shellac. The sheen may be removed by the
heat, steam, and friction of the cleaning
tools. Lacquer and polyurethane coatings
provide a hard durable protective finish
that withstands moisture, but it is always
recommended to test an isolated area of the
surface to be cleaned before proceeding.
We also recommend you check the use
and care instructions from the surface
manufacturer.
When cleaning finished wood surfaces,
use broad, continuous cleaning strokes. To
prevent surface damage, avoid focusing
steam or allowing the cleaning tools to sit in
one spot for any amount of time.
6 1 800 798-7398
Mop
®
1
To remove the Handheld Steamer, press and hold
down the Handle Release Button while pulling out
the handle. (fig. 10)
2
To remove the mop head, press the mop head
release button and pull the mop head off.
(fig. 10)
fig. 10