Touchpad Help; Disable Then Enable The Touchpad; Install An External Mouse; Perform A Complete Power Cycle - Toshiba Tecra Z50-C Series User Manual

Touchpad help

If you are having problems with your touchpad or your
touchpad is not working correctly. The information below will
help guide you through checking some of the most common
causes of touchpad problems.

Disable then enable the touchpad

Press the
more information. see
on page

Install an external mouse

Without a touch screen it may be challenging to navigate
your way around the operating system without a working
touchpad. To help you troubleshoot the issue you may want
to install an (optional) external mouse.
1 Plug a USB mouse into an open USB port on your
computer.
2 If prompted, follow the on-screen instructions for
installation.
NOTE

Perform a complete power cycle

1 Shut down your computer, see
computer" on page
2 Remove all accessories, and unplug all cables. This
includes USB flash drives, SD Card, and the power
cord/cable.
3 If your computer has a user-removable battery, remove
the battery and hold down the power button for
approximately 10 seconds.
4 Reconnect the battery (if you removed it) and the power
cord/cable.
5 Turn On the computer, and try the keyboard again.
If Something Goes Wrong
+ ( ) keys to enable/disable the touchpad. For
FN
167.
The computer may automatically download the needed
driver for your mouse (Internet connection required).
Touchpad help
"Disabling or enabling the touchpad"
"To Shut down your
44.
133