Important Notice; Monitor Description - golmar T1ML Installation Manual

IMPORTANT NOTICE

Platea Uno monitor and T-940 Uno telephone are described on this annex,
as well their programming procedures. System assembly and wiring is
detailed on the instructions manual that's enclosed with the door panel.
Platea Uno monitor and T-940 Uno telephones are fully compatible with
Platea Plus monitor and T-940 Plus handset. However,
a resistor must be installed between 'D' and '
This resistor is supplied with the door panel.
If the distance from the door panel to the farest monitor or telephone is
longer than 200 meters, or the building has more than 200 apartment units,
a RD-Plus/Uno repeater must be installed.
17
' door panel terminals.
–
18
k l m
D
escription of the identification label.
0000000000
Monitor Nº serie
Modelo PLATEA Uno
18Vdc ± 2V ATENCIÓN
Alta tensión. No abrir la tapa.
Standby 15mA
Manipular sólo por personal
Máximo 450mA
del servicio técnico.
10ºC + 50ºC
WARNING
High voltage. Don't open cover.
Handle only by technical service.
MASTER SLAVE
INTER A1 ESCALERA PISO PUERTA
Stair Floor Door
CODIGO / CODE

MONITOR DESCRIPTION

D
escription of the Platea Uno monitor.
Monitor Nº serie 0000000000
Modelo PLATEA Uno
g
18Vdc ± 2V ATENCIÓN
Alta tensión. No abrir la tapa.
Standby 15mA
Manipular sólo por personal
a Máximo 450mA
del servicio técnico.
10ºC + 50ºC
WARNING
High voltage. Don't open cover.
h Handle only by technical service.
MASTER SLAVE
ESCALERA PISO PUERTA
INTER A1
b Stair Floor Door
CODIGO / CODE
i
c
d
e
j
f
a. Handset.
b. B/W screen.
c. Dummy push buttons.
d. On-Off light indicator.
e. Function push buttons.
f . Cord.
g. Attachment holes.
h. Identification label.
i . Connecting points.
j . CN2 connector.
k. Cable slot.
l . Contrast control.
m. Brightness control.
For an easiest repair, replacement or increasement
of the existing monitors, fill the indentifying label
information.
MASTER: master monitor.
SLAVE: slave monitor.
INTER: not available.
A1: not available.
CODE: push button code (*).
STAIR: building code (*).
(*) Refer to the door panel instructions manual.