Ipod ® Or Usb Flash Memory; Homelink (If Equipped) - Honda 2011 ACCORD COUPE Technology Reference Manual

IPOD OR USB FLASH MEMORY
®
Play audio files from your compatible iPod or USB flash memory device through your
vehicle's audio system.
Connecting Devices and Playing Audio Files
1. Open the center console, and pull
out the USB adapter cable.
2. Connect the USB connector to your
iPod dock connector or flash drive.
3. Press CD/AUX or AUX to begin
playing.
iPod is a registered trademark of Apple Computer, Inc., registered in the U.S. and other countries. iPod not included.
10
4. Press the SKIP buttons to change
tracks.
model with
navigation shown
HOMELINK
The HomeLink Universal Transceiver can be programmed to operate up to three
remote-controlled devices around your home, such as garage doors, lighting, or home
security systems.
Training a Button
1
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
2
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
NO YES
a
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
NO YES
If you have any problems programming HomeLink, see the owner's manual included
with the device you are trying to program, call HomeLink at (800) 355-3515, or
visit www.homelink.com.
(if equipped)
®
Press and hold the programmed
3
HomeLink button for about a
second.
Does the device (garage door opener) work?
NO YES
4
Training
Press and hold
complete
the HomeLink
button again.
HomeLink indicator HomeLink LED
flashes for 2 seconds,
remains on.
then remains on.
a
The remote has a rolling code.
Press the "learn" button on the
remote-controlled device (e.g.,
garage door opener).
b
Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.
5
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
11