Vivotek AE-211 User Manual page 7

4.
Mount the bracket on top of camera
in a reversed orientation to gain more
space for the lens module to zoom in/
out. You may change the camera's
vertical position by adjusting the screws
on the sides of bracket.
6.
Route your AC input, DI/DO, and
Ethernet cables through the BR-13
bracket, and then the rubber bushing at
the bottom of the housing.
5.
When done, place the camera into
the housing, secure the bracket to the
bottom of housing, and tighten the
socket screw.
In order to pass cables through, you
may need to disassemble the BR-13
bracket. Use the included L-type wrench
to loosen the screws and pass cables
through the bracket.
When done, re-assemble the bracket
and its swivel parts.
7