Install KView in the Autorun window and refer to the User's Guide on the CD for more information. 1. Insert the Utility CD-ROM into your CD-ROM drive. 2. Click Run autorun.exe (Windows 7/Vista only) 3. Click Install Camera. Quick Installation Guide - KEEBOX IPC1000W English...
Page 5
The Mac ID shown in the Setup Wizard is an example. This is not the actual MAC ID of your IP camera. The Mac ID can be found on the back of the IPC1000W. 5. Connect the Power Adapter to the IP Camera and then to a power outlet. Then click Next.
Page 6
7. Connect a RJ-45 network cable from a router to the network port on the IP Camera. At this point the IP camera should be connected to your router and the router to you computer via network cables. Quick Installation Guide - KEEBOX IPC1000W English...
Page 7
Change Password unchecked if you do not wish to change the password. By default, the Password is admin. Setting a password prevents other users from accessing the IPC1000W's configuration. It is recommended that you enter a new password. If you decide to change this setting, please write down the new password.
Page 8
13. If Encryption is enabled on your wireless network (e.g. access point or wireless router) the correct Authentication and Encryption type will be automatically selected. Enter the Key (wireless network password) and then click Next. Quick Installation Guide - KEEBOX IPC1000W English...
Page 9
14. Disconnect the RJ-45 cable. Verify that the LINK (RED) LED is lit. The IPC1000W will not work wirelessly until you disconnect the Ethernet cable from the back of the camera. Do NOT click Finish until instructed to do so.
Page 10
20. Go to www.java.com to download Java. 18. Right click on the information bar and select Install This Add-on for All Users on This Computer… (Internet Explorer 8) or Install ActiveX Control (Internet Explorer 6/7) Quick Installation Guide - KEEBOX IPC1000W English...
Page 11
19. Click Install (Internet Explorer 6/7/8). 20. Live video will now appear. 21. Click Finish to exit the wizard. English...
WPS button, the old encryption key will be configured on your IP camera. 1. Insert the Utility CD-ROM into your CD-ROM drive. 2. Click Run autorun.exe (Windows 7/Vista only) 3. Click Install Camera. Quick Installation Guide - KEEBOX IPC1000W English...
Page 13
6. Press and hold the WPS button on your wireless router (e.g. W150NR) or access point for 2 seconds 7. Within 120 seconds press and hold the WPS button on the IPC1000W for 5 seconds. The WPS button will start to blink.
Page 14
10. If you would like to change the administrator password, click Change Password, enter a new password, retype the new password and then click Next. Leave Change Password unchecked if you do not wish to change the password. By default, the Password is admin. Quick Installation Guide - KEEBOX IPC1000W English...
Page 15
Ÿ Setting a password prevents other users from accessing the IPC1000W's configuration. Ÿ It is recommended that you enter a new password. If you decide to change this setting, please write down the new password. . Ÿ Password is limited to up to 8 characters.
Page 16
Go to www.java.com to download Java. 15. Right click on the information bar and select Install This Add-on for All Users on This Computer… (Internet Explorer 8) or Install ActiveX Control (Internet Explorer 6/7) Quick Installation Guide - KEEBOX IPC1000W English...
Page 17
16. Click Install 17. Live video will now appear. 18. Click Finish to exit the wizard. English...
1. Go to the TCP/IP settings on your computer and assign a static IP address on your computer's network adapter in the subnet of 192.168.10.x. Since the default IP address of the IPC1000W is 192.168.10.30, do not assign a static IP address of 192.168.10.30 on your computer's network adapter.
Page 19
Hardware Installation and Configuration or Wi-Fi Protected Setup (WPS) Push Button Setup section to reinstall the IP Camera. If you still encounter problems or have any questions regarding the IPC1000W, please contact KEEBOX's Technical Support Department. Quick Installation Guide - KEEBOX IPC1000W...
Wireless Tips The following are some general wireless tips to help minimize the impact of interference within an environment. Assign your network a unique SSID. Do not use anything that would be identifying like “Smith Family Network”. Choose something that you would easily identify when searching for available wireless networks.
Page 21
If you are still experiencing low or no signal consider repositioning the wireless devices or installing additional access points. The use of higher gain antennas may also provide the necessary coverage depending on the environment. Quick Installation Guide - KEEBOX IPC1000W...
Page 22
AC/DC Power Adapter, Cooling Fan, and Power Supply carry a 1 year warranty If a product does not operate as warranted during the applicable warranty period, KEEBOX shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit's warranty continues from the original date of purchase.
Page 26
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.