Ipod Operation - Cambridge SoundWorks SoundWorks i525 User Manual

iPod Operation

Using the iPod dock feature of the i525
1) There is a selection of inserts included with
the i525. These inserts fit various iPod models.
Install the insert that best fits your iPod, or use
the insert included with your Apple iPod.
Make sure the insert snaps into the recess. The
top of the insert should be flush with the top of
the i525.
2) Attach your iPod to the dock connector.
3) Select the iPod as a music source by pressing
PLAY / PAUSE (remote or top panel).
4) Use the iPod navigation buttons on the remote
control to operate your iPod while it is docked
in the i525.
Notes:
To wake a hibernating iPod, push PLAY / PAUSE on
the i525 remote control or top panel.
The i525 will not control a connected iPod while
the i525 is in STANDBY.
The i525 controls iPod functions of a docked
iPhone or iPod touch. After docking one these
models, it may be necessary to manually "unlock"
and select the iPod function before the i525 remote
control can be used.
1
1) Install the dock insert that fits your iPod.
2) Connect your iPod.
i525 Top Panel
3) Select Play / Pause
SOURCE
1
i525 Remote Control
V O LU M E
S E L E C T
S O U R C E
4) Use these iPod buttons to
S M A RT V O L
PRESET
1-8
MENU
SELECT
2
SNOOZE / MUTE
iPod
ENTER
M E N U
S E E K
operate your iPod.
S U R R O U ND C R YS TA L I Z E R
TUNE
SLEEP
NAP
TUNE