Dell S2218H User Manual page 21

Auto Adjust
Input Source
Auto Select
VGA
HDMI
Use this key to activate automatic setup and adjust menu.
Dell S2X18H/HX
The following dialog appears on a black screen as the
monitor self-adjusts to the current input:
Auto Adjustment in Progress...
Auto Adjustment allows the monitor to self-adjust to the
incoming video signal. After using Auto Adjustment, you
can further tune your monitor by using the Pixel Clock
(Coarse) and Phase (Fine) controls under Display Settings.
NOTE: Auto Adjust does not occur if you press the
button while there are no active video input signals or
attached cables.
This option is only available when you are using the
analog (VGA) connector.
Use the Input Source menu to select between the
different video signals that may be connected to your
monitor.
Dell S2X18H/HX
Select Auto Select to scan for available input signals.
Select VGA input when you are using the analog (VGA)
connector. Push
Select HDMI input when you are using the Digital (HDMI)
connector. Push
Energy Use
Brightness / Contrast
Auto Adjust
Press to adjust the screen automatically.
Input Source
Color
Display
Audio
Energy
Menu
Personalize
Others
Resolution: 1920x1080, 60Hz
Energy Use
Brightness / Contrast
VGA
Auto Adjust
HDMI
Input Source
Auto Select On
Color
Reset Input Source
Display
Audio
Energy
Menu
Personalize
Others
Resolution: 1920x1080, 60Hz
to select the VGA input source.
to select the HDMI input source.
Operating Your Monitor
21
|