Connecting Other Equipment; System Connections - Bose Wave SoundTouch IV series Owner's Manual

Connecting Other Equipment

System connections

The connector panel provides connections for external equipment.
1 ANTENNA
3.5 mm FM antenna (75 ohm) connector (page 20).
2 BoseLink
Input connector for the SoundTouch
AUX IN
3
3.5 mm stereo input connector for external sources (page 19).
4 HEADPHONES
A 3.5 mm stereo headphone connector (page 20).
5 Control button
Disables the Wi-Fi ® capability (page 22), initiates setup mode, or restarts the SoundTouch
6 Wi-Fi ® indicator:
• Blinking white – Connecting to Wi-Fi network
• Solid white (dim) – System off and connected to Wi-Fi network
• Solid white (bright) – System on and connected to Wi-Fi network
• Blinking amber – Disconnected from Wi-Fi network
• Solid amber – System is in setup mode
• Off – Wi-Fi networking disabled or system is connected to Ethernet
Ethernet connector
7
Used for a wired network connection.
8 SETUP A
USB Micro-B connector for network setup using a computer.
9
SETUP B
USB Standard A connector reserved for future use.
10 SERVICE
Used for special service functions. Not for customer use.
SoundTouch pedestal Bose link cable
11 ™
Plugs into the Bose link connector. It provides power and control signals to the SoundTouch
The USB connectors are not designed to charge smartphones, tablets, or similar devices.
18 - English
7
6
5
pedestal.
™
2
1
10
9
8
4
3
11
™ pedestal (page 22).
™ pedestal.