Table of Contents
Advertisement
10
device.
Note 4: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
Note 5: USB cable needs powered extender if the length is over 5 m.
DC 5V Out for Device Charge
1
In standby mode (after turning off projector), It will supply power DC 5V to
connected device while pressing Battery button. DC 5V will be turned off
automatically in 60 sec while device charging is full charge or disconnected.
2
In active mode (after turning on projector), MHL and DC 5V are
alternatively powered on, ex. DC 5V is off when MHL is on and DC 5V is on
when MHL is off.
3
In active mode, MHL will be top priority if both DC 5V and MHL port are
occupied.
Note: USB DC 5V out connector support 5V/1.0A power output for
power bank charging only when MHL source is not detected.
Advertisement
Table of Contents
