SAFETY INSTRUCTIONS OF TRAVEL CHARGER
Please read the following information carefully.
1.
The maximum ambient temperature of the travel charger shall not exceed 40° C
(104 degrees F).
2.
The Travel Charger shall be installed according to specification. The current of
load and output power shall not exceed the following value:
Input: AC100-240V~ 50/60Hz 0.15A
Output: DC5V
3.
The Travel Charger shall be used for I.T. equipment only.
4.
For indoor use only.
Cleaning – Unplug this from the wall outlet before cleaning. Do not use liquid
5.
cleaners or aerosol cleaners to clean; use only a dry cloth.
Water and moisture – Do not use this product under moist environment.
6.
Self-servicing – Attempting to service this product on your own, or opening or
7.
removing device covers may result in exposure to dangerous voltage or other
hazards.
8.
Unplug this apparatus during lighting storms or when unused for lengthy
durations.
9.
This Travel Charger is not intended to be repaired by service personnel in case
of failure or component defect.
FCC Notice and Cautions
This device and its accessories comply with Part 15 of FCC Rules.
Operation is subject to the following conditions:
(1) This device and its accessories may not cause harmful interference.
1A
35
Need help?
Do you have a question about the CATALYST and is the answer not in the manual?