Table of Contents
Advertisement
26 | NordStage2USerMaNUaloSv1.7X
The illustration below shows the pitch interval between each voice
when the key of C3 is played . Though some voices have the same
pitch, they differ in tonal character .
C3
Vibrato
The original instrument has two basic vibrato modes; "Light" and
"Heavy", with different rates for each mode . There are several types of
vibrato and choruses available for the Farf model in the Stage 2, which
are activated using the On button in the Vibrato section .
The V1, V2 and the V3 settings are the ones that are modeled after
the original instrument's . Note that the Farf vibrato is common for both
Slots .
Swell Control
Swell is a characteristic feature that you control from an continuous
pedal . Swell is not only a volume control - for the B3 it also changes
the character of the sound in a special way . To use Swell control on the
Nord Stage 2, simply plug in a standard expression pedal to the Organ
Swell input on the rear panel (see page 55) and configure the pedal on
the System Menu (see page 42) .
An expression pedal connected to the Organ Swell input will control
Swell for all organ models .
If you have only one expression pedal, it can be used both as a generic
Control Pedal to control the Morph, and as a Swell Pedal . This is
selected in the System Menu, see page 43 .
Rotary Speaker
The Rotary Speaker controls are logically placed next to the Organ sec-
tion . The Rotary Speaker and its settings are described in detail in the
Effects Reference on page 39 .
Advertisement
Table of Contents
