Lance Lab TC 7 Quick Start Manual

Quick Start Guide: TC 7
7 m Telescopic Camera Lance

Mini DVR Controls

Side View
To turn on Mini DVR, ensure the mode switch (standby) is set
to position "N", the power button must be then be held for 10
seconds until the blue light illuminates and the screen turns on.

TC 7 Lance Assembly Guide

TC 7 Mini DVR Setup Guide

© 2014 Lance Lab Ltd™
Top View
Front View
LCD Display
Lance Lab Ltd™ ∙ C2 Strangford Business Park ∙ Ards Business Centre
Jubilee Road ∙ Newtownards ∙ County Down ∙ BT23 4YH ∙ United Kingdom
Reference Description
1 Power Button / Camera Button
2 Video Record Button
3 Rewind Button (menu back)
4 Fast Forward Button (menu forward)
5 ESC Button
6 Ok/ Enter Button
7 Micro SD® Card Slot
8 Speaker (Not in use with TC 7)
9 Microphone (Not supplied with TC 7)
10 Video Feed Connector (AV/ in)
11 Charging Indicator
12 System Status Indicator
13 AV Output (AV/ out)
14 USB Port
15 Mode Switch ("Q" standby / "N" On)
DO NOT SUBMERGE THE CAMERA
HEAD IN LIQUID / WATER.
To begin a recording simply press the
record button on the Mini DVR when the live
video feed can be seen. Press ESC to end
the recording. To take a photograph simply
press the power button once (allow 5 seconds
between photo's).
Further guidance on using the Mini
DVR system correctly is provided in the
TC 7 operating manual and online at
www.lancelab.com.
TM
(14.02.15)