Table of Contents
Advertisement
Hue bulbs
In the following step, you will select the Philips hue bulbs that
have to follow the Ambilight.
You can select a maximum of 9 Philips hue bulbs for
Ambilight+hue.
To select the bulbs for Ambilight+hue...
1 - In the Configure Ambilight+hue menu, select Hue bulbs and
press OK.
2 - Mark the bulbs that have to follow the Ambilight. To mark a
bulb, select the bulb name and press OK.
3 - When you're done, select the OK button and press OK.
With the bulbs marked for Ambilight+hue, go to page
Configure bulb.
Configure bulb
In the following step, you will configure each Philips hue bulb.
To configure each hue bulb...
1 - Select the bulb name in the Configure Ambilight+hue menu
and press OK. The bulb you selected is blinking.
2 - First indicate where you placed the bulb relative to the TV. A
correct setting of the Angle will send the correct Ambilight color
to the bulb. Press (up) or (down) to adjust.
3 - Press (right) to set the distance.
4 - Secondly, indicate the Distance between the bulb and the
TV. The further away from the TV, the weaker the Ambilight
color. Press (up) or (down) to adjust.
5 - Press (right) to set the brightness.
6 - Finally, set the Brightness of the bulb. Press (up) or
(down) to adjust.
7 - To stop configuring this bulb, select OK and press OK.
8 - In the Configure Ambilight+hue menu, you can select every
bulb and do the same.
9 - When all Ambilight+hue bulbs are configured, select Finish
and press OK.
Ambilight+hue is ready for use.
You can always change the Ambilight+hue configuration later.
To change the configuration, press and select Setup > TV
settings > Ambilight > Ambilight+hue.
Immersion
With Immersion, you can adjust the level of the Ambilight effect
for the Ambilight+hue bulbs.
To adjust the Ambilight+hue Immersion...
1 - Press and select Setup and press OK.
2 - Select TV settings > Ambilight > Ambilight+hue >
Immersion and press OK.
3 - Press (up) or (down) to adjust.
4 - Press , repeatedly if necessary, to close the menu.
.
Info
In View configuration, see the current Ambilight+hue
configuration, such as which network you are using and how
many bulbs are connected.
To view the current Ambilight+hue setup...
1 - Press and select Setup and press OK.
2 - Select TV settings > Ambilight > Ambilight+hue > View
configuration and press OK.
3 - Select the item you want to view and press OK.
4 - Press , repeatedly if necessary, to close the menu.
Advanced Ambilight settings
Wall color
With Wall color, you can neutralize the influence of a colored
wall on the Ambilight colors. Select the color of the wall behind
the TV and the TV will modify the Ambilight colors to appear as
they are intended.
To select the color of the wall .
1 - Press and select Setup and press OK.
2 - Select TV settings > Ambilight > Advanced > Wall color.
3 - Select the color sample that matches the color of the wall
behind the TV and press OK.
4 - Press , repeatedly if necessary, to close the menu.
TV turn off
With TV turn off, you can set Ambilight to turn off immediately
or slowly fade out when you turn off the TV. The slow fade out
gives you some time to turn on the lights in your living room.
To select the TV turn off . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Ambilight > Advanced > TV turn off.
3 - Select Fade out to off or Immediate turn off.
4 - Press , repeatedly if necessary, to close the menu.
Lounge light mood
When the TV is on standby, you can turn Ambilight on and
create a Lounge light effect in your room.
To turn Ambilight on while the TV is on standby, press
(Ambilight).
To change the Lounge light color range, press
(Ambilight) again.
To turn off Lounge light, press and hold (Ambilight) for a
few seconds.
58
Advertisement
Table of Contents
