Lenovo ThinkVision T2224dA User Manual page 10

4. Connect the digital to the DP connector of the monitor and the other end on the back of the
computer.
5. Insert the power cord into the monitor, then plug the monitor power cord and the computer
cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant
national installation and or equipment regulations shall be considered. A certified power
supply cord not lighter than ordinary polyvinyl chloride flexible cord according to
IEC 60227 (designation H05VV-F 3G 0.75mm
used. Alternative a flexible cord be of synthetic rubber according to IEC 60245
(designation H05RR-F 3G 0.75mm
6. Put all the cables in order by the detachable cable management, and fix it in the slot in the
stand cover.
2
or H05VVH2-F2 3G 0.75mm
2
) shall be used.
2
) shall be
1-6
Chapter 1.